smartpro 230v 1.5kva 900w line-interactive sine wave ups, snmp, webcard, tower, usb, serial model number: SMX1500SLT description tripp lite's SMX1500SLT intelligent, line-interactive sine wave ups system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. large internal batteries offer 20 min. half load runtime and 8 min. full load runtime. 1500va/900w power handling capability and full-time sine wave output offer guaranteed compatibility with networking, telecom and other sensitive electronic applications. includes 8 ups-protected c13 output receptacles. supports simultaneous remote monitoring of ups and site power conditions via built-in network accessory card slot, usb and db9 serial monitoring ports. hid-compliant usb interface enables full integration with built-in power management and auto shutdown features of windows and mac os x. optional snmpwebcard accessory enables remote monitoring of ups as a managed device via network management console applications. communications interfaces support messaging of ups and line power status, plus output power control for delayed or immediate reboot of all connected devices at once. includes poweralert ups monitoring and unattended shutdown software with management support for an unlimited number of network ups systems. single-line tel/dsl and network ethernet line surge suppression. built-in audible alarm and 9 leds provide status notification for line power, battery power, battery charge level, load level, plus avr boost and trim operational status information. network-grade ac surge suppression protects equipment from damage and performance problems resulting from transient surges. attractive, all-black tower housing. features 1500va/900w power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices large internal batteries offer runtimes of 20 minutes at half load (750va/450w) and 8 minutes at full load (1500va/900w) automatic voltage regulation (avr) circuits maintain user-selectable 220v, 230v or 240v nominal output over an input voltage range of 174-266v (220v), 182-278v (230v) or 190-290v (240v) 8 c13 output receptacles iec320-c14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles poweralert ups monitoring and unattended shutdown software included offers simultaneous monitoring by up to 3 directly connected devices through included usb, db9 and snmp* interfaces (*requires optional snmpwebcard), or the monitoring of any number of additional ups systems over ip with included poweralert monitoring software communications ports support messaging of ups and line power status, including on-battery, low-battery, power restored, ac line voltage, dc battery voltage and remaining battery capacity highlights 1.5kva / 1500va line interactive tower ups; sine wave output 220/230/240v nominal output during brownouts and overvoltages usb, rs232 and optional snmp/web card interface front panel status leds with detailed load and battery capacity display c14 inlet; 8 c13 outlets; 2 c13 to c14 cables included package includes SMX1500SLT ups system poweralert software cd-rom usb and serial cabling 2 iec c13-to-c14 jumper cables owner's manual with warranty information 1 / 5
voltage and remaining battery capacity hid-compliant usb interface enables full integration with built-in power management and auto shutdown features of windows and mac os x supports tripp lite's watchdog software (requires optional watchdogsw) 9 leds provide continuous status information of ups operating parameters and site power quality hot-swappable batteries allow on-site battery replacement without powering off connected equipment optional pdubhv10 bypass pdu enables hot-swappable ups replacement with no disruption to connected equipment single-line tel/dsl and network ethernet line surge suppression ce/iec 62040, gost, saso, rohs-compliant, class a specifications output output volt amp capacity (va) 1500 output kva capacity (kva) 1.5 output watt capacity (watts) 900 power factor 0.6 nominal output voltage(s) supported 220v; 230v; 240v nominal voltage details 230v default (voltage selection via back panel switches) frequency compatibility 50 / 60 hz output voltage regulation (line mode) -9% / + 5% output voltage regulation (battery mode) +/- 5% output receptacles (8) c13 included output power cables includes 2 c13 to c14 output power cables hot-swap pdu options pdubhv10 (2u / 8 c13 outlets) output ac waveform (ac mode) sine wave output ac waveform (battery mode) pure sine wave input rated input current (maximum load) 4.1a (220v),3.9a (230v), 3.8 (240v) nominal input voltage(s) supported 220v ac; 230v ac; 240v ac ups input connection type c14 inlet ups input connection description iec320-c14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles input phase single-phase battery 2 / 5
full load runtime (min.) 8 min. (900w) half load runtime (min.) 20 min. (450w) dc system voltage (vdc) 36 battery recharge rate (included batteries) less than 8 hours from 10% to 90% (typical, full load discharge) internal ups replacement battery cartridge rbc36-slt battery access battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 182 to 278 (230v), 190 to 290 (240v), 174 to 266 (220v) overvoltage correction voltage reduction of 12% applies when input is 244 to 278 (230v), 254 to 290 (240v), 232 to 266 (220v) undervoltage correction voltage boost of 14% applies when input is 182 to 206 (230v), 190 to 216 (240v), 174 to 198 (220) user interface, alerts & controls switches 2 switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch audible alarm audible alarm indicates power failure and overload conditions led indicators 9 leds indicate line power, battery power, avr, overload and replace battery status - with a 3-led level meter for load and battery charge level surge / noise suppression ups ac suppression joule rating 350 ups ac suppression response time instantaneous ups dataline suppression 1 line tel/dsl (1 in / 1 out); 10/100base t ethernet emi / rfi ac noise suppression yes physical primary form factor tower ups power module dimensions (hwd, in.) 10.2 x 6.8 x 13.2 ups power module dimensions (hwd, cm) 26 x 17.1 x 33.7 ups power module weight (lbs.) 45 ups power module weight (kg) 20.4 ups shipping dimensions (hwd / in.) 14 x 9.8 x 18.5 3 / 5
ups shipping dimensions (hwd / cm) 35.6 x 24.8 x 47 shipping weight (lbs.) 48.6 shipping weight (kg) 22.1 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 195.3 battery mode btu / hr. (full load) 582.9 ac mode efficiency rating (100% load) 94% audible noise audible noise < 50 dba at front side 1 meter communications communications interface usb; db9 serial; slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 4-8 milliseconds low voltage transfer to battery power (setpoint) 174v (220v), 182v (230v) or 190v (240v) high voltage transfer to battery power (setpoint) 266v (220v), 278v (230v) or 290v (240v) special features cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries certifications ups certifications ce; tested to gost (russia); tested to saso (saudi arabia); meets fcc part 15 category a (emi) ups certification details ce / iec 62040 4 / 5
warranty product warranty period (international) 2-year limited warranty product warranty period (mexico) 2-year limited warranty product warranty period (puerto rico) 2-year limited warranty ? 2015 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 5 / 5
|
